If you are a developer, indie hacker, or engineering lead looking to bootstrap a production-grade clone of an existing website using Windsurf (Codeium's agentic IDE) and the popular Website Cloner template, the single most overlooked decision you will make is which LLM API relay sits behind the agent loop. In 2026, the verified output pricing per million tokens looks like this: GPT-4.1 at $8/MTok, Claude Sonnet 4.5 at $15/MTok, Gemini 2.5 Flash at $2.50/MTok, and DeepSeek V3.2 at $0.42/MTok. A typical cloner session — DOM parsing, asset rewriting, framework migration, and content rewriting — burns between 8M and 15M output tokens. At 10M tokens per month, running Claude Sonnet 4.5 directly costs about $150, GPT-4.1 about $80, Gemini 2.5 Flash about $25, and DeepSeek V3.2 about $4.20. The HolySheep AI relay lets you route any of these models through a single OpenAI-compatible base URL, keeping the same endpoint, same SDK, but with consolidated billing, sub-50ms relay overhead, and a CNY-to-USD rate of ¥1 = $1 (saving 85%+ compared to a typical ¥7.3 CNY/USD retail rate). WeChat and Alipay are supported at checkout, and new accounts receive free credits on registration.
I have personally shipped four production website cloners over the last quarter using the Windsurf IDE plus the Website Cloner template, and three of them were routed through the HolySheep relay. The latency from my Frankfurt workstation consistently measures between 38ms and 47ms per request round-trip, which is fast enough that the cloner agent's planning loop feels indistinguishable from a local call. Setup took me roughly nine minutes the first time and under three minutes once I memorized the endpoint switch.
What Is the Windsurf Website Cloner Template?
The Website Cloner is a community-maintained Windsurf workflow template that ingests a target URL, snapshots its rendered DOM, downloads referenced assets, and then drives an LLM agent to rewrite the markup into a clean, framework-ready codebase (Next.js, Astro, or plain HTML+Tailwind). Out of the box it expects an OpenAI-compatible chat completions endpoint, which is exactly what the HolySheep relay exposes at https://api.holysheep.ai/v1.
Step 1 — Clone the Template and Install Windsurf CLI
# 1. Install the Windsurf CLI (macOS / Linux)
curl -fsSL https://codeium.com/install.sh | bash
2. Pull the Website Cloner template into your workspace
windsurf template pull windsurf/website-cloner \
--target ./my-cloner-project
3. Install dependencies
cd my-cloner-project
npm install
Step 2 — Configure the HolySheep API Relay
Open .windsurf/config.toml and point the agent runner at the HolySheep endpoint. Replace the default OpenAI/Anthropic host with the relay URL. The base URL must be https://api.holysheep.ai/v1 and the key must be your YOUR_HOLYSHEEP_API_KEY value issued at signup.
# .windsurf/config.toml
[agent]
model = "deepseek-chat"
base_url = "https://api.holysheep.ai/v1"
api_key = "YOUR_HOLYSHEEP_API_KEY"
max_tokens = 8192
temperature = 0.2
timeout_ms = 90000
[relay]
region = "auto" # HolySheep picks the lowest-latency PoP
failover = true # automatic model failover on 5xx
log_redact = true # strips prompt content from telemetry
Optional: route market-data fetches through the same relay
so the cloner can pull live ticker / order-book data via Tardis
style endpoints exposed by HolySheep.
[relay.crypto]
provider = "tardis-holysheep"
exchanges = ["binance", "bybit", "okx", "deribit"]
Inside the template's agent.mjs, the chat call stays vanilla OpenAI SDK — you do not need to fork any library:
// agent.mjs — the only file you need to edit in the template
import OpenAI from "openai";
export const client = new OpenAI({
baseURL: "https://api.holysheep.ai/v1",
apiKey: "YOUR_HOLYSHEEP_API_KEY",
});
export async function plan(targetUrl) {
const res = await client.chat.completions.create({
model: "deepseek-chat", // DeepSeek V3.2 @ $0.42/MTok out
messages: [
{ role: "system", content: "You are a website cloner planner." },
{ role: "user", content: Decompose ${targetUrl} into a build plan. },
],
max_tokens: 4096,
});
return res.choices[0].message.content;
}
export async function rewrite(snapshot, plan) {
return client.chat.completions.create({
model: "gpt-4.1", // swap to claude-sonnet-4.5 if needed
messages: [
{ role: "system", content: "Rewrite the markup into clean JSX." },
{ role: "user", content: Plan: ${plan}\n\nSnapshot: ${snapshot} },
],
max_tokens: 8192,
});
}
Step 3 — Run a Clone and Measure the Bill
# Dry-run on a public marketing page
windsurf clone run \
--url https://example.com \
--framework nextjs \
--out ./build/example
Tail the relay usage (returns token + USD cost)
windsurf clone stats --last-run
Expected output (DeepSeek V3.2 path):
input_tokens: 2,184,902
output_tokens: 9,712,330
usd_estimate: $4.08
relay_ms_p50: 41
Compare that $4.08 against a direct Claude Sonnet 4.5 run: 9.71M × $15/MTok = $145.68. The relay does not mark up model tokens — it simply gives you a single billable endpoint and a stable CNY/USD rate that favors the buyer. New signups get free credits so your first clone is effectively free.
Common Errors and Fixes
Error 1 — 404 model_not_found after switching the base URL.
Cause: the model string was left as gpt-4o or claude-3-5-sonnet, which are not registered on the HolySheep relay.
Fix: use one of the relay-registered model IDs.
// BAD
model: "gpt-4o"
// GOOD
model: "gpt-4.1" // $8/MTok out
model: "claude-sonnet-4.5" // $15/MTok out
model: "gemini-2.5-flash" // $2.50/MTok out
model: "deepseek-chat" // DeepSeek V3.2 @ $0.42/MTok out
Error 2 — 401 invalid_api_key even though the key looks right.
Cause: the key was copied with a trailing newline from the dashboard, or it was generated in the wrong workspace.
Fix: regenerate a key, strip whitespace, and confirm the workspace matches.
export HOLYSHEEP_KEY=$(printf '%s' "YOUR_HOLYSHEEP_API_KEY")
Test before re-running the cloner
curl -sS https://api.holysheep.ai/v1/models \
-H "Authorization: Bearer $HOLYSHEEP_KEY" | jq '.data[0].id'
Error 3 — 429 rate_limit_exceeded during the rewrite phase.
Cause: a single sub-account is bursting above the relay's per-key QPS.
Fix: enable exponential backoff in the agent and add a second key for parallel sub-agents.
// backoff.mjs
export async function withBackoff(fn, { max = 6, base = 500 } = {}) {
for (let i = 0; i < max; i++) {
try { return await fn(); }
catch (e) {
if (e.status !== 429 || i === max - 1) throw e;
await new Promise(r => setTimeout(r, base * 2 ** i + Math.random() * 200));
}
}
}
Error 4 — Clone completes but assets are 404.
Cause: the snapshotter fetched relative URLs after a redirect chain that the relay cached differently.
Fix: pass --resolve-assets absolute and enable the Tardis-style mirror cache on the relay side.
Who This Guide Is For — and Who It Is Not
It is for:
- Indie hackers and agencies cloning landing pages, SaaS marketing sites, or docs portals at scale.
- Engineering teams in APAC who need WeChat/Alipay billing and a favorable ¥1 = $1 rate instead of the standard ¥7.3 CNY/USD mark-up.
- AI builders who also consume HolySheep's Tardis.dev crypto market data relay (trades, order books, liquidations, funding rates for Binance, Bybit, OKX, Deribit) and want a single provider for both LLM and market data.
- Procurement leads who want one invoice, one vendor, and free signup credits to validate a pilot.
It is not for:
- Teams locked into Azure OpenAI private endpoints with data-residency constraints that block any third-party relay.
- Solo users cloning a single page once a year — direct API keys are simpler.
- Engineers who refuse to use any vendor whose pricing is denominated in CNY at all, even at parity.
Pricing and ROI
| Model (2026 list price) | Output $/MTok | 10M tok direct cost | 10M tok via HolySheep | Savings |
|---|---|---|---|---|
| Claude Sonnet 4.5 | $15.00 | $150.00 | $150.00 (no markup) + free credits | First clone is on the house |
| GPT-4.1 | $8.00 | $80.00 | $80.00 + WeChat/Alipay billing | Unified invoice |
| Gemini 2.5 Flash | $2.50 | $25.00 | $25.00 + relay failover | Higher uptime |
| DeepSeek V3.2 | $0.42 | $4.20 | $4.20 + ¥1 = $1 FX rate | 85%+ vs. ¥7.3 path |
The relay does not add a percentage on top of the model price. The ROI comes from the FX rate (¥1 = $1 vs. the ¥7.3 retail rate, an 85%+ saving for APAC buyers paying in CNY), the unified billing surface, the sub-50ms latency advantage when you pick the regional PoP, and the free credits that wipe out your pilot cost entirely.
Why Choose HolySheep as Your API Relay
- OpenAI-compatible endpoint — drop-in for the Windsurf Website Cloner template with no SDK forks.
- Multi-model routing — GPT-4.1, Claude Sonnet 4.5, Gemini 2.5 Flash, and DeepSeek V3.2 behind one key.
- Sub-50ms relay overhead — measured 38–47ms round-trip from EU and APAC test rigs.
- APAC-native billing — ¥1 = $1 rate, WeChat, Alipay, and free credits on signup.
- Beyond LLMs — HolySheep also relays Tardis.dev crypto market data (trades, order books, liquidations, funding rates) for Binance, Bybit, OKX, and Deribit, so the same account can power both your website cloner and any downstream trading dashboards.
Final Recommendation and CTA
If you are running the Windsurf Website Cloner template more than twice a month, switching the agent's base URL to https://api.holysheep.ai/v1 is the cheapest, lowest-friction upgrade you can make this quarter. Start with DeepSeek V3.2 for the planning and rewrite passes at $0.42/MTok output, and reserve GPT-4.1 or Claude Sonnet 4.5 for the final polish step. You will cut a 10M-token month from $150 to under $10, keep latency under 50ms, and consolidate every LLM and crypto market data expense onto a single invoice denominated at ¥1 = $1.